Tenda W541R User Manual page 17

Wireless Broadband Router User's Guide
The configuration parameters of the
LAN port of the router is displayed here.
1. MAC Address: To display the MAC
address of the router in the LAN, its
value can not be changed.
2. IP Address: To display the IP address
of the router in the LAN, the factory
default value is 192.168.0.1, you can
change it according to your
requirements.
For example, you can change the IP
address of the router as 192.168.3.1 as
the figure beside.
Note: If you change this IP address
into a new IP address, then next time
when you log in the router, you must use
this new IP address to access the
management interface of the router. And
all the default gateway of the computer
14