Page 2 Page 2 BassX-8/10/12 Owner’ s Manual Eazy6 Owner’ s Manual SAFETY INSTRUCTIONS APPLICABLE FOR USA, CANADA OR WHERE CAUTION: To reduce the risk of electric APPROVED FOR USAGE shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
For optimal performance, the BassX-8, BassX-10 or BassX-12 should be placed in a corner along the same wall as the front speakers. The unit is shielded, so it is safe to place near video devices. When choosing a place for the BassX-8, BassX-10 or BassX-12, please keep the following in mind: •...
Page 6
Connecting the Speaker Wires (See Diagram 4) Follow these instructions when using the Speaker Level Outputs of your receiver or amplifier to connect to the BassX-8, BassX-10 or BassX-12. For best results, use speaker wire that is at least 18 gauge. For runs longer than 75 feet, 14 gauge wire is recommended.
TROUBLESHOOTING The BassX-8, BassX-10 and BassX-12 are designed to function trouble-free. Most problems occur due to operating errors. If you have a problem, please check the troubleshooting list first. If the problem persists, please call Tech Support at 1-800-448-0976 or e-mail us at techsupport@speakercraft.com.
SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option may replace the unit with a cur- rent model of equal or greater value.
Need help?
Do you have a question about the BassX-8 and is the answer not in the manual?
Questions and answers