Foot Brake - Grizzly G0670 Owner's Manual

Foot Brake

52
ON
Note: Do not confuse this feature with the emer-
gency stop button. The emergency stop button
cuts power to the machine and does not apply the
brake. This button must be reset to restore power
to the lathe.
Figure 52.
Figure
OFF
Figure 53
The carriage stop system is designed to
stop the longitudinal carriage movement
at optional locations when the feedrod is
engaged.
When the leadscrew is engaged for thread-
ing operations, the carriage stop system
ON/OFF
will not disengage the leadscrew—you must
move the half nut lever instead. Otherwise
the carriage can crash into the chuck, or if
it contacts the stop, the leadscrew shear
pin will break.
Before doing any threading operations,
make sure to loosen the feedrod stop collar
so it slides freely on the feedrod.
Adjustable Carriage
Stop System
NOTICE
Figure 53