To install a chuck or faceplate:
1.
2.
3.
4.
5.
NOTICE
Never install a chuck or faceplate without
having the camlock cap screws in place
or fully tightened. If you ignore this notice,
the chuck may never be able to be removed
since the camlock studs will turn with the
camlocks and never release.
6.
Figure 29
Figure 29.
7.
Figure 30.
Figure 30.
8.
Note: If any of the cam lines (Figure 30) do
not fall between the "V" marks when the cam
lock is tight, you must adjust the offending
camlock stud as discussed in Camlock Stud
Adjustment on Page 24.
9.
V