Setup; Unpacking; Piece Inventory - Grizzly G0516 Instruction Manual

Unpacking

This combination lathe/mill is shipped from the
manufacturer in a carefully packed crate. If you
discover the machine is damaged after you've
signed for delivery, and the truck and driver are
gone, you will need to file a freight claim with the
carrier. Save the containers and all packing mate-
rials for possible inspection by the carrier or its
agent. Without the packing materials, filing a
freight claim can be difficult. If you need assis-
tance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
The Model G0516 is a
heavy machine, 420 lbs.
shipping
NOT move the machine
by yourself – you will
need
power
Serious personal injury
may occur if safe moving
methods are not fol-
lowed.
Some metal parts may
have sharp edges on
them
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
When you are completely satisfied with the con-
dition of your shipment, you should inventory its
parts.
-10-
SECTION 5: SET-UP
weight. DO
assistance and
equipment.
after they are

Piece Inventory

Inside the crate you will find:
• Model G0516 Base Unit
• Mill/Drill Attachment
• Backsplash
• 6mm Allen ® Wrench
• 5mm Allen ® Wrench
®
• 4mm Allen Wrench
®
• 3mm Allen Wrench
• 75T Gear
• 72T Gear
• 70T Gears (2)
• 68T Gear
• 66T Gear
• 60T Gear
• 50T Gear
• 48T Gear
• 45T Gear
• 40T Gear
• Fixed-Shaft Gear 40T
• Lathe Chuck Key
• 5.5/7mm Combo Wrench
• 8/10mm Combo Wrench
• 12/14mm Combo Wrench
• 17/19mm Combo Wrench
• 36mm Wrench
• Drill Chuck Key
• 3 Outside Jaws
• Dead Center MT#2
• Dead Center MT#3
• Spanner Wrench
• 19mm T-Handle Wrench
• Square Head Wrench
• Oil Can
• Taper Shank MT#3 & Drill Chuck
• T-Nut
• Mill/Drill Table
• Cap Screws M8-1.25 x 25 (4)
• Mill/Drill Fuse 110V/5A
• Lathe Fuse 110V/25A
• Carriage Handle & Screw
• Apron Handle & Screw
• Faceplate
• 4-Jaw Chuck w/Flange
• Fixing Pin
G0516 Lathe/Mill