Toshiba Strata DK8 User Manual page 34

STRATA DK DIGITAL LCD TELEPHONE
To Record a Message:
1. Press the # button to access
alpha characters. Refer to
Figure 4-1 for an explanation
of the dialpad buttons.
or 1 to move the
2. Press
*
cursor (–) to the desired
position (the left edge of the
display for a new message, or
two spaces to the right of the
preprogrammed message to
add information).
3. Press the button that has the
letter you want to enter. Use
the 0 button to shift from
letter to letter on the button.
4. If you want to enter a number,
press the # button to change
to numeric characters.
Numbers are also entered on
the dialpad. Press the #
button again to return to alpha
characters.
5. The following special
characters are set by pressing
1 and then pressing 0 to step
through the available
characters:
4-2
1 button moves
cursor to the right
(also used to access
special characters
and to enter "blanks"
in the alpha mode)
*
button moves the
cursor to the left
0 button is used to shift between the three letters on each alpha button (also
used to access special characters)
Figure 4–1
Dialpad Information
Example: If you press 3, a "D" will be displayed. By pressing 0, the "D" is
changed to "E". By pressing 0 again, the "E" is changed to "F". Press 0
again and the "F" changes to "D".
To enter a space, press 1 when in the alpha mode.
Q, Z, :, -, +, /.
MESSAGES AND MEMOS
Each button has three
letters that are used in
messaging; the 0 button
1 3 is used to shift between
2
ABC DEF
the letters
4 5 6
JKL
GHI MNO
7 8 9
PRS
TUV WXY
#
* 0
OPER
# button alternates
between alpha and
numeric characters