Toshiba Strata DK8 User Manual page 40

STRATA DK DIGITAL LCD TELEPHONE
To Program Speed Dial Names
and Numbers:
1. Press the Redial button,
then the Speed Dial button.
2. Dial the desired speed dial
code.
# * N N S P E E D D I A L
3. Press the Mode button.
* 1 0 N A M E
S P E E D D I A L
4. Enter the name or memo (12
character maximum - refer to
Recording a Message for
method).
5. Press the Mode button.
6. Enter the desired telephone
number (20 digits maximum).
7. Press the Redial button to
record data in memory.
8. Repeat steps 2–7 to enter
more memos.
To Dial a Speed Dial Number:
1. Press the Mode button
when telephone is idle.
2. Dial 8 NN (NN = 1 0 ~ 4 9
or 6 0 ~ 6 9).
4-8
Press SDS or if your telephone is not equipped with a Speed Dial
*
button.
NN = Speed Dial Code. (10~49 station) or (60~99 system station 10
only)
NOTE:
A station must be enabled via system programming for LCD message
memory.
If a name was previously stored on this code, it will display on the top line
of the LCD.
The name will appear on the top line of the LCD as you enter it.
The number will appear on the bottom line of the LCD as you enter it.
The LCD displays "MODE NO.?"
The speed dial number appears with name or memo. Personal speed
dial code numbers are 10 ~ 49, and system numbers, stored from station
10 only, are 60 ~ 99.
MESSAGES AND MEMOS