Table of Contents
Advertisement
Operating Your Camera
EXPOSURE SETUP
1.BRIGHTNESS
2.SHUTTER
3.AGC
4.SENS-UP
5.RETURN
BRIGHTNESS : Adjusts the video brightness.
SHUTTER : You can select the shutter.
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
NTSC : x512 ~ x2, 1/60 ~ 1/120,000 sec
PAL : x512 ~ x2, 1/50 ~ 1/120,000 sec
- A.FLK : Select this when you experience picture flicker, this happens when there is
a clash with the installed lighting frequency.
Notes
• Set the shutter mode to --- if color rolling occurs.
• W hen the SHUTTER is set to ESC after selecting the Internal Synchronization Type, the
picture may become unstable if the camera faces a bright fluorescent light. Therefore,
take care when choosing the installation position.
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the greater the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP :
When it is night or dark, the camera automatically
detects the light level and maintains a clear picture if
this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
COLOR DOME CAMERA
25
---
HIGH
OFF
18
User Guide
Notes
• I f you set the Function Setup switch to 'AUTO' mode, you can adjust the brightness by
increasing or decreasing the shutter speed. (x2 ~ x512)
• N ote that the higher the zoom level, the brighter the screen, but the more likely it is that an
after-image will appear.
• A lthough Noise, Spots, and Whitish symptoms may occur in SENS-UP operation when the
zoom level is increased, this is normal.
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
White Bal (White Balance)
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select 'White Bal.' by using the Function
Setup switch so that the arrow indicates 'White Bal'.
2. Select a desired mode using the Function Setup switch.
MAIN SETUP
1.LENS SHADE
2.EXPOSURE
3.WHITE BAL
4.SSDR
※ Select one of the following 5 modes, as appropriate for your purpose.
ATW
: Select this when the color temperature is between 1,700˚K and
11,000˚K.
OUTDOOR : Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
INDOOR
: Select this when the color temperature is between 4,500˚K and
8,500˚K.
COLOR DOME CAMERA
ON
ATW
OFF
19
User Guide
Advertisement
Table of Contents
