Samsung SCD-2020 User Manual page 15

Operating Your Camera
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
Notes
• W hen using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the L/L
type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the 'INT' mode.
 MOTION DET :
This product has a feature that allows you to observe
movement of objects in 8 different areas on the screen,
and the words 'MOTION DETECTED' appear on the
screen when movement is detected. You can monitor
activity more efficient.
... ...  When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates 'MOTION DET'.
... ...  Set up the mode using the Function Setup switch.
- SENSITIVITY : Y ou can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small
movement.
- AREA MODE : D etermines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- FILL → SET : Fills in a selected MD area. The color of filling is sequentially selected as brown,
orange, blue, cyan, green, yellow, magenta and red.
- RETURN : S elect this to save the MOTION DET menu settings and return to the SPECIAL menu.
Notes
• M OTION DET areas show only MOTION DET menu. Therefore, MOTION DET areas don't
display on the monitor screen.
COLOR DOME CAMERA
28
User Guide
PRIVACY : Mask an area you want to hide on the screen.
PRIVACY AREA SETUP
1. AREA
2. MODE
3. MASK COLOR
4. MASK TONE
5. TOP
6. BOTTOM
7. LEFT
8. RIGHT
9. RETURN
1) ... When the SPECIAL menu screen is displayed, press the Function Setup switch so
that the arrow indicates 'PRIVACY'.
... 2) ... Set up the mode using the Function Setup switch.
...
- AREA : You can select up to 12 PRIVACY areas.
- MODE : D etermines whether to use the area selected in the AREA.
- MASK COLOR : D etermine area color. You can select Green, Red, Blue, Black, White,
Gray.
- MASK TONE : A djust the brightness of MASK COLOR.
- TOP/BOTTOM/LEFT/RIGHT : Adjust the size and position of the selected area.
- RETURN : S elect this to save the PRIVACY menu settings and return to the
SPECIAL menu.

DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
Resets the camera settings to the factory defaults. Language is not initialized.
Notes
• As the DIS function uses the digital zoom, the camera's resolution will decrease.
• DIS doesn't operate when background illumination is too low.
• DIS doesn't operate when object pattern is monotonic as like sky or white wall.
COLOR DOME CAMERA
AREA1
OFF
GREEN
1
39
79
13
52
29
User Guide