Table of Contents
Advertisement
Operating Your Camera
Menu Setup
Use the Function Setup switch within the camera.
Function Setup switch
1. Press the Function Setup switch.
• Main setup menu is displayed on the monitor screen.
MAIN SETUP
Select the function by
1.LENS SHADE
moving up or down direction
2.EXPOSURE
of function setup switch.
3.WHITE BAL
4.SSDR
5.BACKLIGHT
6.SSNR3
7.DAY/NIGHT
8.SPECIAL
9.EXIT
2. Select a desired function using the Function Setup switch.
• Place the cursor over a desired item.
3. Set up a selected item by using the Function Setup switch.
4. To finish the setting, select 'EXIT' and press the Function Setup switch.
Notes
• A n item with the
icon also has sub menus. To select a sub menu, select an item with the icon
and press the Function Setup switch.
• A n item with the - - - icon is unavailable due to function settings.
COLOR DOME CAMERA
ON
Change the status by
moving right or left
direction of function
ATW
setup switch.
OFF
OFF
ON
COLOR
SAVE
16
User Guide
LENS SHADE
LENS SHADE diminishes brightness contrast to obtain balanced view in the monitor.
MAIN SETUP
1.LENS SHADE
2.EXPOSURE
- OFF : LENS SHADE NOT IN USE
- ON : LENS SHADE IN USE
- EFL : You can choose Effective Focal length of lens.
(2.8mm, 3.0mm, 3.7mm, 6.0mm, 8.0mm)
- Default setting value of EFL
· SCD-2020N/P : 3.7mm
· SCD-2040N/P : 8.0mm
· SCD-2021N/P : 3.7mm
- SHADE GAIN : Please adjust brightness gain on the
fringe of monitor.
Notes
• C hange EFL only when you change lenses.
• A pplicable lenses: F2.0, EFL=2.8mm, 3.0mm, 3.7mm, 6.0mm, 8.0mm.
• The bigger SHADE GAIN can make the brighter fringe area but also the more image distortion and noise.
EXPOSURE
MAIN SETUP
1.LENS SHADE
2.EXPOSURE
3.WHITE BAL
1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function
Setup switch so that the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
COLOR DOME CAMERA
ON
ON
ATW
17
User Guide
Advertisement
Table of Contents
