Preparing The Camera - Olympus ?-7050 Instruction Manual

Preparing the Camera

Preparing the Camera
Inserting the battery
1
2 2
1 1
Battery/card compartment Battery/card compartment
2
Insert the battery by putting in the ▼ marked side
fi rst, with the B marks toward the battery lock knob.
Damage to the battery exterior (scratches, etc.) may
produce heat or an explosion.
Insert the battery while sliding the battery lock knob in
the direction of the arrow.
Slide the battery lock knob in the direction of the
arrow to unlock, and then remove the battery.
Battery/card Battery/card
compartment cover compartment cover
lock lock
Battery lock knob Battery lock knob
Turn off the camera before opening the battery/card
compartment cover.
When using the camera, be sure to close the battery/
card compartment cover.
3
1 1
Charging the battery and setting up
using the supplied CD
Connect the camera to the computer to charge the battery
and use the supplied CD for setup.
User registration using the supplied CD and
installation of ib computer software is available on
Windows computers only.
The camera battery can be charged while the camera is
connected to a computer.
●
The indicator lamp lights during charging and turns
off when charging is complete.
Charging takes up to 3 hours.
If the indicator lamp does not light, the camera is not
correctly connected or the battery, camera, computer,
or USB cable may not be functioning as expected.
We recommend that you use a computer equipped
with Windows XP (Service Pack 2 or later), Windows
Vista, or Windows 7. See "Charging the battery with
the included USB-AC adapter" (p. 16) if you are using
a different computer or wish to charge the battery
without using a computer.
2 2
EN
13