Olympus ?-7050 Instruction Manual page 17

The battery is not fully charged at shipment. Before
use, be sure to charge the battery until the indicator
lamp turns off (up to 3 hours).
If the indicator lamp does not light, the USB-AC
adapter is not connected to the camera correctly,
or the battery, camera, or USB-AC adapter may be
broken.
For details on the battery and the USB-AC adapter,
see "Battery and USB-AC adapter" (p. 66).
The battery can be charged while the camera is
connected to the computer. Charging time varies
depending on the performance of a computer. (There
may be cases in which it takes approx. 10 hours.)
When to charge the batteries When to charge the batteries
Charge the battery when the error message shown below
appears.
Flashes in red
4 4
14
M
Monitor top left
When not using a computer When not using a computer
See the next section under "Date, time, time zone, and
language"
Date, time, time zone, and language
The date and time set here are saved to image fi le names,
date prints, and other data. You can also choose the
language for the menus and messages displayed in the
monitor.
1
2
3
BATTERY EMPTY
Error message
Press the n button to turn on the
camera.
●
The date and time setting screen is displayed when
the date and time are not set.
---- ----
CANCEL
Date and time setting screen
Use FG to select the year for [Y].
2010 2010
CANCEL
Press I to save the setting for [Y].
2010
CANCEL
X
Y M D TIME
. . :
-- -- -- -- Y / M / D
MENU
X
Y M D TIME
. . :
-- -- -- --
Y / M / D
MENU
X
Y M D TIME
. . :
00 00 -- -- -- Y / M / D
MENU
EN
17