Olympus ?-7050 Instruction Manual page 39

Table of Contents

Advertisement

Shooting at higher magnifi cations than
Shooting at higher magnifi cations than
optical zoom [DIGITAL ZOOM]
optical zoom [DIGITAL ZOOM]
I (Shooting menu 1)
Submenu 2
OFF
Disable digital zoom.
ON
Enable digital zoom.
[DIGITAL ZOOM] is not available when [a SUPER
MACRO] (p. 32) is selected.
The option selected for [DIGITAL ZOOM] affects the
appearance of the zoom bar.
"To take larger images" (p. 21)
Reducing the blur caused by the
Reducing the blur caused by the
camera shake when shooting
camera shake when shooting
[IMAGE STABILIZER] (still images)/
[IMAGE STABILIZER] (still images)/
[IS MOVIE MODE] (movies)
[IS MOVIE MODE] (movies)
J (Shooting menu 2)
IMAGE STABILIZER (still images)/
A (Movie menu)
IS MOVIE MODE (movies)
Submenu 2
The image stabilizer is deactivated.
This is recommended for shooting
OFF
when the camera is fi xed in place on
a tripod or other stable surface.
ON
The image stabilizer is activated.
For information on using the menus, see "Using the Menu" (p. 5).
DIGITAL ZOOM
Application
Application
The camera's default settings are [IMAGE
STABILIZER] (still images) to [ON] and [IS MOVIE
MODE] (movies) to [OFF].
There may be a noise coming from inside the camera
when the shutter button is pressed with [IMAGE
STABILIZER] (still images) set to [ON].
Images may not be stabilized if camera shake is too
severe.
When the shutter speed is extremely slow, such as
when taking pictures at night, [IMAGE STABILIZER]
(still images) may not be as effective.
When shooting while the [IS MOVIE MODE] (movies)
is set to [ON], the image will be enlarged somewhat
before saving.
Viewing the image immediately after
Viewing the image immediately after
shooting [REC VIEW]
shooting [REC VIEW]
J (Shooting menu 2)
Submenu 2
The image being recorded is not
displayed. This allows the user
OFF
to prepare for the next shot while
following the subject in the monitor
after shooting.
The image being recorded is
displayed. This allows the user to
ON
make a brief check of the image that
was just taken.
REC VIEW
Application
39
EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

M-7050

Table of Contents