Table of Contents
Advertisement
installation
2.
Connect Power and video cables and arrange them through the hole you want
to pass when mounting the main body on the mounting bracket, note that not
to damage or squeeze the cables.
Power input terminal
3.
Adjust the lens in a desired direction.
4.
Secure the Shield case to the main unit.
5.
Assemble the camera on its mounting bracket
with the three screws using L Wrench (included).
M
The installation should be done by qualifi ed service personnel or system installers.
If the ceiling material is not strong enough to hold the installation screws, the camera may fall off.
Reinforce the ceiling as needed.
14_ installation
Shield case
Dome cover
Video output jack
Advertisement
Table of Contents
