Bunn G1 Installation & Operating Manual
Hide thumbs
Also See for G1:
- Operating & service manual (23 pages) ,
- Illustrated parts catalog (20 pages) ,
- Installation & operating manual (12 pages)
Advertisement
Quick Links
G1,G2,G3
& G2
trifecta™
INSTALLATION & OPERATING GUIDE
BUNN-O-MATIC CORPORATION
POST OFFICE BOX 3227
SPRINGFIELD, ILLINOIS 62708-3227
PHONE: (217) 529-6601
FAX: (217) 529-6644
To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts
Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at
www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and
manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
43254.0000B+ 04/11 ©2010 Bunn-O-Matic Corporation
Advertisement
Related Manuals for Bunn G1
Summary of Contents for Bunn G1
- Page 1 To ensure you have the latest revision of the Operating Manual, or to view the Illustrated Parts Catalog, Programming Manual, or Service Manual, please visit the Bunn-O-Matic website, at www.bunn.com. This is absolutely FREE, and the quickest way to obtain the latest catalog and manual updates. For Technical Service, contact Bunn-O-Matic Corporation at 1-800-286-6070.
- Page 2 SOLE OPTION AS SPECIFIED HEREIN, TO REPAIR, REPLACEMENT OR REFUND. In no event shall BUNN be liable for any other damage or loss, including, but not limited to, lost profits, lost sales, loss of use of equipment, claims of Buyer’s customers, cost of capital, cost of down time, cost of substitute equipment, facilities or services, or any other special, incidental or consequential damages.
-
Page 3: User Notices
READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF WARRANTY AND BEFORE GRINDING LIABILITY BEFORE BUYING OR USING THIS PRODUCT PERSONAL INJURY HAZARD 20545-0000D 01/04 © 1990 Bunn-O-Matic Corporation Keep Fingers & Foreign Objects CAUTION START out of Hopper or Chute Opening 20545.0000... -
Page 4: Electrical Requirements
ELECTRICAL REQUIREMENTS CAUTION - The grinder must be disconnected from the power source until specified in Initial Set-Up. Refer to Data Plate on the Brewer, and local/national electrical codes to determine circuit requirements. 100V & 120V 230 VOLT CE Model Models Note: This electrical service consists of 2 current carrying conductors (L1 and Neutral) and a separate conductor... -
Page 5: Preventive Maintenance
PREVENTIVE MAINTENANCE Bunn-O-Matic Corporation recommends that preventive maintenance be performed at regular intervals. Maintenance ® should be performed by a qualified service technician. For Technical Service, contact Bunn-O-Matic Corporation at ® 1-800-286-6070. NOTE: Replacement parts or service caused by failure to perform required maintenance is not covered by warranty. -
Page 6: Coffee Grinding
COFFEE GRINDING Turn the selector knob to align the arrow with the desired grind. Raise the top lid and add the whole bean coffee. Close the top lid. Locate the back of a bag behind the dispense chute or insert the brew cup. (The grinder will not operate unless the bag/brew cup sensor is activated) Allow the bag to rest on the screen beneath the chute.