Headstock/Column - Grizzly G4008 Instruction Manual

Headstock/Column

1. Place the Headstock assembly onto the top of
the column and lower it until it is seated on the
column as far as it will go. CAUTION: The
head assembly is quite heavy; get assistance
when lifting.
2. Rotate the headstock until it lines up with the
base.
3. Secure the headstock to the column by tight-
ening the setscrews located on the side.
Figure 4.
Figure 4.
G4008/G4009 Drill Press
4. Screw the three handle bars into the tapped
holes in the handle body. Figure 9.
Figure 5.
-9-