Table of Contents
Advertisement
2.4.2 Advanced Settings
You can set advanced wireless LAN parameters of this router. The parameters include
Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble
Type ...... You should not change these parameters unless you know what effect the
changes will have on this router.
Parameters
Authentication Type
Fragment Threshold
Default
Description
There are two authentication types: "Open
System" and "Shared Key". When you select
"Open System", wireless stations can associate
with this wireless router without WEP encryption.
When you select "Shared Key", you should also
setup WEP key in the "Encryption" page and
wireless stations should use WEP encryption in
the authentication phase to associate with this
wireless router. If you select "Both", the wireless
client can associate with this wireless router by
using any one of these two authentication types.
"Fragment Threshold" specifies the maximum
size of packet during the fragmentation of data
to be transmitted. If you set this value too low, it
will result in bad performance.
Advertisement
Table of Contents
