Table of Contents
Advertisement
Set Security
Click Apply button at the bottom of the screen to save the above configurations. You can now
configure other advance sections or start using the Access Point.
Set Security
You can set up the WEP encryption used for the communication between all access
points or wireless routers that join the bridging job. The WEP setting here is not used to
protect the communication between the wireless stations and this wireless router.
Parameters
Enable WEP Security
Key Length
will pop up. You can see the status of all active wireless stations that are
connecting to the access point.
Click "Set Security" to set up the WEP encryption used for the
communication between all access points or wireless routers that
join the bridging job.
Description
Enable the WEP encryption between wireless
routers and access points that join the bridging job
You can select the 64-bit or 128-bit key to encrypt
transmitted data. Larger WEP key length will provide
higher level of security, but the throughput will be lower.
You also can select Disable to transmit data without
encryption.
Advertisement
Table of Contents
