Subscribe to Our Youtube Channel
Related Manuals for Venstar INSTEON 2491T1E
Summary of Contents for Venstar INSTEON 2491T1E
- Page 1 ® Venstar INSTEON Thermostat Owner’s Manual ® INSTEON Remote Control Venstar Thermostat Model #s - 2491T1E, 2491T7E Page 1 of 8...
-
Page 2: Features And Benefits
Venstar INSTEON Thermostat Congratulations on purchasing the Venstar INSTEON thermostat. Now you can use the power of INSTEON to control the temperature of your home, from anywhere in the house, or the world. Recall stored setpoints and mode settings from any INSTEON controller to maintain comfort and save energy. - Page 3 Install the thermostat by following the enclosed Venstar documentation. Note: This thermostat is not compatible with Venstar accessories that connect via the phone-style jack on bottom of Venstar products.
- Page 4 Removing Venstar Thermostat as an INSTEON Responder If you are going to discontinue using the Venstar thermostat, it is very important that you remove it from all scenes in which it is a member. Otherwise, scene controllers will retry commands repetitively and creating network delays and broken scene memberships will remain in scene responders.
-
Page 5: Other Features
Removing Venstar Thermostat as an INSTEON Controller If you are no longer going to use the Venstar thermostat as a scene controller, or if you are removing a scene responder from the home, it is important that you remove the scene memberships. - Page 6 report to any automation controller or interface you link, check with the manufacturer’s documentation to confirm support of this feature. To enable change reports 1. Press the thermostat mode button until the thermostat mode (and LED) turns off 2. Press and hold the Set button on thermostat for 3 seconds The thermostat LED will begin blinking green.
-
Page 7: Factory Reset
2. INSTEON I.D can be found on another sticker in the format ##.##.##, such as”12.34.45.” Factory Reset The factory reset procedure clears all settings from the Venstar thermostat, including INSTEON scenes. 1) If possible, remove all scene memberships prior to performing the factory reset. - Page 8 Problem Possible Cause Solution Unlink any unused responders from the controller. The controller may be sending HINT: If you are using home automation software Thermostat is taking a commands to a responder that is no such as HouseLinc, you can easily check scene long time to respond to a longer in use.
Need help?
Do you have a question about the INSTEON 2491T1E and is the answer not in the manual?
Questions and answers