Grizzly G0562Z Owner's Manual page 17

6.
align each of the collector supports with the
mounting holes on the base, as shown in
figure 13, then secure them in place with (4)
⁄ "-18 x ⁄ " flange bolts.
5 1
16 2
Collector
support
x 4
figure 13. Collector support installed.
7. With assistance, place one of the rubber
gaskets around the rim of the intake on one
of the collectors, then secure the collector
to the metal "y" outlet with (8)
flange bolts (see figure 14).
note: The collector attaches to each support
bracket. The inside of the collector is fun-
nel shaped and directs the air around in a
cyclonic motion.
Collector
x 8
gasket
"y" outlet
figure 14. Collector installed.
Model g0562z/zp, g1030z2/z2p (Mfg. 11/11+)
⁄ "-18 x ⁄ "
5 1
16 2
x 2
Canister
support
8.
attach the top of the canister support to the
collector with (2) 5 ⁄
16
as shown in figure 14.
g1030z2/g1030z2p only: place the upper
bag support over the canister support and
secure it with (2) ⁄
5
16
shown in figure 15.
Canister
support
figure 15. Mounting collector to brackets.
9. repeat steps 7 & 8 for the other collector.
the assembly should now look similar to
figure 16.
figure 16. Collectors installed (g0562z shown).
"-18 x 1 ⁄ " flange screws,
2
"-18 x ⁄ " flange bolts, as
1
2
upper Bag support
Collector
-15-