Silencing An Alarm; Turning Off Or On An Alarm - Nexus NX Sea Data Installation And Operation Manual

Table of Contents

Advertisement

English
6.5

Silencing an alarm

To silence a triggered alarm that sounds and flashes, press ANY
button.
The sound is silenced and the flashing stops.
The alarm is only triggered again if the selected depth value is
exceeded (shallower or deeper) by 2 m (6 feet).
6.6

Turning OFF or ON an alarm

Select the alarm function to be turned off / on.
To turn the alarm off / on, press CLEAR.
The minute sign ( ´ ) disappears / appears.
When a triggered alarm has been silenced, it will only be triggered
again if the selected depth value differs by +/-2m (6 ft)
If a different page than DEPTH is shown when the alarm is
triggered, the set alarm function will automatically be shown
flashing, until you silence or turn off the alarm. The instrument will
then automatically return to the previous page.
Loss of depth signals are indicated with 3 dotted lines ( --- ) until a
new echo is received.
18
SEA DATA

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NX Sea Data and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents