Table of Contents
Advertisement
C
h
a
p
t
e
r
2
:
I
C
h
a
p
t
e
r
2
:
I
Choosing a place for the ADSL Router
1.
Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach it easily.
2.
Avoid placing the device in places where people may walk on the cables. Also keep it away from direct
sunshine or heat sources.
3.
Place the device on a flat and stable stand.
Connecting the ADSL Router
Follow the steps below to connect the related devices.
1.
Remove the end of the phone line from your phone connector and plug it onto the "LINE" port of the POTS
Splitter. Use another phone line to connect your phone and splitter. Plug this phone line onto the "PHONE" port
of the ADSL splitter, and plug the other end of the line onto your phone.
2.
Use the line to connect the ADSL splitter (MODEM port) and router's DSL port.
3.
Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your ADSL Router.
4.
Connect the other end of the cable to the Ethernet port of the client PC.
5.
If you want to connect to a hub for used by many devices, please connect the other end to the uplink port of the
hub.
n
s
t
a
l
l
a
t
i
o
n
n
s
t
a
l
l
a
t
i
o
n
Chapter 2: Installation
3
- Quick Links:
- Features
- Bridge Mode
- Router Mode
- Device Information
Hide quick links:
Advertisement
Table of Contents
