Multiple Pvcs Mode - Zte ZXDSL-531B User Manual

Multiple PVCs Mode

PC(s)
Description:
As this ADSL Router supports multiple PVCs in the ADSL loop, you are allowed to configure several logical
channels in one physical loop. You can use mixed encapsulation types by applying them to different PVCs. When the
system starts up, it will connect to CO site through the PVCs according to the sequence they are created. Therefore
the default route will be the last PVC you created. You can also modify the default route manually from the IPRoute
page.
The traffic from CPE side will be sent to different PVCs according to the routing rules.
Configuration:
1. Start up your browser and type 192.168.100.100 as the address to enter this ADSL web-based manager.
2. Create the first PVC (e.g. PVC1) using the RFC1483 data mode.
Refer to the section of "Router Mode" for details.
3. Create the second PVC (e.g.PVC2) using the PPPoE data mode. Refer to the section of "PPPoE + NAT
Mode" for details.
4. Save the configuration by execute System >Save and System >Restart to restart your router for initiating these
settings.
ADSL
(PPPoE)
Router
Hub
PVC2
Loop
PVC1
(IPoA)
Public IP(s)
Pre-assigned by ISPs
Chapter 3: Connection Mode
128.12.0.0
Service
PVC2b
Aggregator
STM-1
PVC1a
DSLAM 140.196.0.0
RADIUS
Server
ISP
a
ISP
b
13