Grizzly G0569 Owner's Manual page 33

3.
Figure 36 & 37
Figure 36
Figure 37.
4.
Figure 38
1
Note: The / " spacing is ideal, although with
16
larger blades it may not be possible. In such
cases, adjust the guide bearings as far for-
ward to the blade gullets as possible, and still
maintain the proper support bearing spacing
adjustment.
Figure 38.
NOTICE
Make sure that the blade teeth will not con-
tact the guide bearings when the blade is
against the rear support bearing during the
cut or the blade teeth will be ruined.
5.
6.
7.
Note: 0.004" is approximately the thickness
of a dollar bill.
8.
NOTICE
Whenever changing a blade or adjusting ten-
sion and tracking, the upper and lower blade
support bearings and guide bearings must
be properly adjusted and locked before cut-
ting operations.