Mounting to Shop
Floor
Bolting to Concrete Floors
NOTICE
Anchor studs are stronger and more per-
manent alternatives to lag shield anchors;
however, they will stick out of the floor,
which may cause a tripping hazard if you
decide to move your machine.
Figure 12
Figure 12
To install the riser blocks:
1.
2.
3.
Note: The riser bars have tabs with holes for
mounting the bandsaw unit to the floor to maxi-
mize stability. We highly recommend utilizing them
and securing the bandsaw to the floor.
Riser Blocks
Figure 13.
Figure 13