Important Safety Instructions - Delta Electronics Amplon Family User Manual

1. IMPORTANT SAFETY INSTRUCTIONS

z This manual contains important instructions that should be followed during installation and
maintenance of the UPS and batteries.
z Install the on line UPS in a well ventilated area, away from flammable liquids and gases. Do
not let the unit come in contact with water.
z External slits and openings in the cabinet are provided for ventilation. To ensure reliable
operation of the product and to protect from overheating these openings must not be
blocked or covered. Objects must never be inserted into ventilation holes or openings.
z Do not stand beverage containers on the unit.
z This UPS was designed to power all modern computer loads and associated peripheral
devices, such as monitors, modems, cartidge tape drives, external floppy drives etc.. Do not
use it for pure inductive or capacitive loads. It is not rated to power life support equipment.
z All recorded media, such as diskettes, tapes and cartridges, should be kept a minimum of
60cm from the UPS. Otherwise, the magnetic field created by operation of the UPS may
erase data on those devices.
z All repairs or installation should be performed by qualified service personnel. The UPS
contains voltages which are potentially hazardous. The output receptacles may be alive
even when the UPS is not connected to the mains.
z Risk of a possible electrocution is possible when the battery is connected to the UPS.
Therefore, do not forget to disconnect the batteries before any service is to be done on the
UPS. To disconnect, remove the battery fuse holder which is located at the rear panel of the
UPS.
z Isolate Uninterruptible Power Supply (UPS) before working on the circuit. A readily
accessible disconnect device shall be incorporated in the fixed wiring.
z HIGH LEAKAGE CURRENT – Earth connection essential before connecting power source.
z Federal Communications Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions manual, may
cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC Caution: To assure continued compliance, (example-use only shielded interface
cables when connecting to computer or peripheral devices). Any changes or modifications
not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
1