Nautilus Quinton Owner's Manual page 50

®
want to change by pressing [ENTER]. Then,
use the [SPEED UP or DOWN] keys to view the
choices for the selected option. Press [ENTER]
to accept the choice for that option.
The customize options are as follows:
Max time limit
• Use the numeric keypad to enter the desired
time limit between 5 and 99 minutes. Press
[ENTER] to accept the new time limit.
Change default Cool Down Time
• Use the numeric keypad or [SPEED UP or
DOWN] keys to change the desired default cool
down time between 1 and 10 minutes. Press
[ENTER] to accept the new value.
Change units
• Use the [SPEED UP or DOWN] keys to toggle
between USA units and Metric units. Press
[ENTER] to select your option.
Choose the type of heart rate input.
• See Heart Rate Priority in the previous section
for details of the choices.
Select Stats
Use the [Speed UP or DOWN] keys to view the
choices (Vertical Feet, Calories/Hour, Watts
and METs). Press [ENTER] to select your
option. Press [SPEED UP or DOWN] to toggle
between ON and OFF. Press [ENTER] to
confi rm your selection.
Choose console language
• Use the [SPEED UP or DOWN] keys to view the
choices (English, German, French, Spanish, Italian,
48
C H A N G I N G T H E G A M E I N H E A LT H A N D F I T N E S S
CONSOLE CODES
Dutch, Swedish, Japanese). Press [ENTER] to
select your option.
Adjust upper LCD screen contrast
• Use the [SPEED UP or DOWN] keys to increase
or decrease the contrast level of the upper LCD.
Press [ENTER] to select your option.
Adjust lower LCD screen contrast
• Use the [SPEED UP or DOWN] keys to increase
or decrease the contrast level of the upper LCD.
Press [ENTER] to select your option.
Change Max Speed
• Use the numeric keypad or the [SPEED UP or
DOWN] keys to change the desired max speed
for your facility. Valid speed range is 0.5 mph
– 12 mph (0.8 – 19.2 kph).
Enable Mag Key
Use the [SPEED UP or DOWN] keys to enable
or disable the Magnetic Safety Stop feature.
Press [ENTER] to select your option.
Auto Stop
• Use the [SPEED UP or DOWN] keys to enable or
disable the Auto Stop feature. Press [ENTER]
to select your option.
Reset Defaults
• This code will reset all exercise parameters to
the factory defaults. Press [ENTER], to accept
the default values.
3. To exit "CUSTOMIZE", press the [CLEAR] key.
®