General Specifications Model Number Identification Guide; Vert-I-Pak Chassis Specifications; Electrical Data - Friedrich VERT-I-PAK VEA09 Installation & Operation Manual

®
Vert-I-Pak
SERIES
DESIGN SERIES

Electrical Data

MODEL:
Model
Important: All 208/230v chassis must be hard wired with properly sized breaker. See namplate for specific chassis electrical
requirements. See figure 9 (Page 12) for unit wiring and wall thermostat wiring. See page 6 for wire size. Use HACR type
breakers to avoid nuisance trips. All field wiring must be done in accordance with NEC and local codes.
920-075-10
- R 2 2
ENGINEERING CODE
OPTIONS
25 = 2.5 KW
34 = 3.4 KW
- R 2 2 - R 2 2
5