Fault Display - Teleco Flat Sat Elegance User Manual

Using the TV to watch other sources (digital terrestrial channels or a DVD, etc.)
Press the key (1) to close the antenna as explained in the section above: wait for the antenna
to close and the TV to turn off.
To switch the TV back on press the key (2): use the remote control to change the channel
or, for example, change the TV input source ("INPUT" key).
Once you have finished watching the TV, press the key (2) to switch off the TV.
Should any faults occur, these are displayed by the antenna animation on the TV screen.
11

Fault display

1) Before performing antenna tracking operation, make sure you
have positioned your vehicle so that the view towards the South
(where Satellite signals come from) is free from any nearby
obstacle (trees, houses, etc.). This way, the antenna will be free
to receive signals coming from the satellite.
2) It is also important to know that satellites do not transmit with
the same intensity throughout Europe, so if you are outside the
reception area, your Flat Sat Elegance search might be
unsuccessful. The reception areas for each Satellite can be found
on the main magazines dealing in this line of business. Also
remember that the larger the dish, the more reception area is
available.