Operation - Teleco Flat Sat Elegance User Manual

Operation of the complete Kit with Black Box, Sat Decoder and TV
Turning on the Flat Sat Elegance
To turn on the Flat Sat Elegance system, press the button (1) for about 1 second.
This will turn on the Kit Black Box, Sat Decoder and TV and start the initializing operations.
1
Selecting the satellite
The available satellites are listed in the selection menu. The name of the selected satellite
is highlighted in the middle of the screen. A box with animated antenna provides information
on the search status. The user can change the satellite by pressing the key (8).
8
If the highlighted satellite is the one you have chosen, no further selection is needed; after
a few seconds the antenna will start rotating to indicate beginning of the search stage. You
can even change the satellite during a search, or after tracking has been performed, always
pressing the key (8).
8