Operation - Teleco Flat Sat Elegance User Manual

Operation of the Flat Sat Elegance without Kit
(without both Sat Decoder and Teleco TV)
Turning on the Flat Sat Elegance
To turn on the Flat Sat Elegance system, press the button (1) for about 1 second.
This will turn on the Black Box and start the initializing operations.
As the DECODER and the TV are not part of the Kit, they are to be turned on via the remote
controls supplied by the related manufacturers.
When the initialization procedure is over, the satellite selection menu is brought to the TV
screen:
1
Selecting the satellite
The available satellites are listed in the selection menu. The name of the selected satellite
is highlighted in the middle of the screen. A box with animated antenna provides information
on the search status. The user can change the satellite by pressing the key (8).
8
If the highlighted satellite is the one you have chosen, no further selection is needed; after
a few seconds the antenna will start rotating to indicate beginning of the search stage. You
can even change the satellite during a search, or after tracking has been performed, always
pressing the key (8).
26