To Attach Stand Mixer Attachment; Before Attaching Stand Mixer Attachment - KitchenAid MVSA Manual To Expert Results

To Attach Stand Mixer Attachment

Before Attaching Stand Mixer
Attachment
1. Turn Stand Mixer speed control to
"0" (OFF).
2. Unplug mixer or disconnect power.
3. Depending on which type of hub you
have, either flip-up the hinged cover
or loosen the attachment knob (A)
by turning it counter clockwise and
remove attachment hub cover.
4. Insert the attachment shaft housing (B)
into the attachment hub (C) making
certain that the attachment power
shaft fits into the square hub socket.
5. It may be necessary to rotate the
attachment back and forth. When the
attachment is in proper position, the
pin on the attachment housing will fit
into the notch on the hub rim.
6. Tighten the attachment knob by turning
it clockwise until the attachment is
completely secured to the mixer.
WARNING
Rotating Blade Hazard
Always use food pusher.
Keep fingers out of openings.
Keep away from children.
Failure to do so can result in
amputations or cuts.
2
C
B
A