Page 3
English ................5 Deutsch ................00 Français ................00 Italiano ................00 Nederlands ..............00 Español ................00 Português ................. 00 Ελληνικά ................00 Svenska ................00 Norsk ................00 Suomi ................00 Dansk ................00 Íslenska ................00 Русский ................00 Polski .................
SPARKLING BEVERAGE MAKER INSTRUCTIONS TABLE OF CONTENTS SPARKLING BEVERAGE MAKER SAFETY Important safeguards ................... 6 Safe handling of your Sparkling Beverage Maker ..........7 Machine rating specifications ................8 User licence for one SodaStream CO Cylinder ..........8 PARTS AND FEATURES Parts and accessories ...................
SPARKLING BEVERAGE MAKER SAFETY IMPORTANT SAFEGUARDS WARNING: When using this appliance, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To reduce the risk of injury, close supervision is necessary when an appliance is used near children. 3.
SPARKLING BEVERAGE MAKER SAFETY Safe Handling of your Sparkling Beverage Maker It is important that you read and understand all use and care instructions and the important safety information before operating this Sparkling Beverage Maker. IMPORTANT SAFETY INFORMATION CARBONATING BOTTLE: •...
SPARKLING BEVERAGE MAKER SAFETY Machine rating specifications Maximum working pressure: 145 PSI / 10 Bar. Maximum allowed operating temperature: 40°C. Bottle capacity at fill line will be in the range of 400 ml / 1.0 litre (varies by size and shape of carbonating bottle used). Brimful bottle capacity will be in the range of 480 ml –...
PARTS AND FEATURES Parts and accessories Carbonation lever Carbonation gauge SodaStream Cylinder Sturdy die-cast construction Carbonating tube Bottle loading lever 1 L Carbonating bottle W10624164A_EN_v05.indd 9 6/3/14 3:51 PM...
ASSEMBLING THE SPARKLING BEVERAGE MAKER Installing the SodaStream CO Cylinder Before First Use Place the Sparkling Beverage Maker on a flat, sturdy surface, in an upright position. Remove packaging materials. The Sparkling Beverage Maker uses 3 AAA batteries. To replace batteries, see the “Care and Cleaning”...
USING THE SPARKLING BEVERAGE MAKER Making sparkling water Rinse the carbonating bottle before use. To insert bottle, make sure that the Prior to making sparkling water, fill bottle carbonation lever is in its fully upward with water up to the fill line. For best position and the bottle loading lever is results, carbonate chilled water.
USING THE SPARKLING BEVERAGE MAKER To release bottle, push Carbonation lever to Pull bottle toward you to release bottle its fully upward position. You will hear the from snap-lock; the bottle will be released sound of excess CO discharge. automatically. WARNING: Do not remove the bottle until after you hear the sound of excess finish discharging.
CARE AND CLEANING Replacing the batteries To remove back cover: Grasp back Use a Phillips screwdriver to loosen the cover and pull away from unit. Set screw holding the battery compartment cover aside. cover plate in place. Replace three AAA batteries in the battery compartment, put the cover plate in place and secure with the screw.
CARE AND CLEANING Cleaning the Sparkling Beverage Maker Never use abrasive cleaners or sharp Wipe the exterior of the Sparkling tools to clean. If needed, use a mild Beverage Maker with a soft cloth. hand dishwashing liquid and a soft, Wipe spills in base to keep base dry.
CARE AND CLEANING Replacing the SodaStream CO Cylinder The SodaStream CO Cylinder is provided to you under licence. See “User Licence for One SodaStream CO Cylinder” section. The licence allows you to exchange your empty SodaStream CO Cylinder for a full one at a participating SodaStream authorised retailer near you.
TROUBLESHOOTING IMPORTANT: Before you call for service, check the list of problems and solutions below: 1. Sparkling Beverage Maker does 4. You hear CO escaping from not work: the bottle during carbonation: • You might be out of CO ; replace your •...
Page 17
TROUBLESHOOTING CMD + SHIFT CLICK TO CHANGE COPY 7. You hear CO escaping from 11. Small pieces of ice appear in the the Cylinder: water during carbonation: • There may be a pressure leak between • This might happen when carbonating the CO Cylinder holder and the valve.
DAMAGES. Customer service In U.K. and Ireland: For any questions, or to find the nearest KitchenAid Authorised Service Center, please find our contact details below. NOTE: All service should be handled locally by an Authorised KitchenAid Service Center. Contact number for U.K. and Northern Ireland: Freephone number 0800 988 1266 (calls from mobile phones are charged standard net- work rate) or call 01942605504.