American Audio DCD-PRO310 MKII User Manual page 17

R C
EMOTE ONTROL
(20) REMOTE JACK – Connect the supplied 8 pin din cable from this jack to the player's
remote connector. This will allow you to control the player functions.
P U (F
LAYER NIT RONT
(21) DRIVE 1 Transport Tray - This tray is used to load and unload a compact disc into the
drive 1 mechanism. The tray is opened and closed by pressing the Drive 1 OPEN/CLOSE
button (22). Never attempt to force the transport tray open or close when the power is
turned off.
(22) DRIVE 1 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and
close the Drive 1 transport tray. NOTE: When a disc is already loaded in the transport tray,
the tray will not open unless the unit is in pause or cue mode.
(23) POWER SWITCH - This switch is used to control the unit's main power. A red LED
directly above the power switch will glow to indicate main power is active.
(24) DRIVE 2 OPEN/CLOSE (Transport Tray Open/Close) - This button is used to open and
close the Drive 2 transport tray. NOTE: When a disc is already loaded in the transport tray,
the tray will not open unless the unit is in pause or cue mode.
(25) DRIVE 2 Transport Tray - This tray is used to load and unload a compact disc into the
Drive 2 mechanism. The tray is opened and closed by pressing the Drive 2 OPEN/CLOSE
button (24). Never attempt to force the transport tray open or close when the power is
turned off.
©American Audio®
– R
EAR
)
www.americanaudio.us DCD-PRO310 MKII™
Figure 4
Figure 5
User Manual Page 17