Dsc/Radio Setup Mode - Vertex Standard VM-3500E Owner's Manual

11.4 DSC/RADIO SETUP MODE

The RAM+ can access the DSC / RADIO setup menu (refer to section "9 DIGI-
TAL SELECTIVE CALLING" and section "10 RADIO SETUP" for details). The
LAMP , CONTRAST
controls the RAM+'s display and speaker.
DSC/RADIO Setup mode from the RAM+:
1. Press and hold down the [ CALL/SET ] key until "
pears.
2. Press the [ ] / [ ] key to select "
3. Press the [ CALL/SET ] key, then select the menu item you wish to work on
by pressing the [ ] / [ ] key.
4. Press the [ CALL/SET ] key.
5. Press the [ ] / [ ] key to change the value or condition for the menu item,
then press the [CALL/SET] key to save the new setting.
6. Press the [ ] / [ ] key to select "
return to the normal operation.
RADIO SETUP-menu
DSC SETUP-menu
VM-3500E
, and KEY BEEP menu item accessed from the RAM+ only
RADIO SETUP
RADIO SETUP
" or "
," then press the [ CALL/SET ] key to
EXIT
" menu ap-
DSC SETUP
" menu.
Page 61