8.11 SCANNING
This function is only available in some versions. Allows the user to select the
scan type from Memory scan or Priority scan. "Memory scan" scans the chan-
nels that were programmed into memory. "Priority scan" scans the channels
programmed in memory with the priority channel.
8.11.1 Selecting the Scan Type
1. Press and hold down the [ CALL ( MENU )] key until
Radio Setup
"
2. Press the [ ENT ] key, then select "
"
Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select "
ity
Memory
" or "
5. Press the [ ENT ] key to store the selected setting.
6. To exit this menu and return to radio operation mode
press the [ 16/9 ] key.
8.11.2 Memory Scanning M-SCAN
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the CHANNEL selector knob.
Press the [ F ] key followed by the [ 2 ( MEM )] key,
"MEM" will appear on the LCD which indicates the
channel has been programmed into the transceivers
memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver's memory, select the channel
then press the [ F ] key followed by the [ 2 ( MEM )] key, "MEM" will disappear
in the LCD.
5. To start scanning, press the [ F ] key followed by the [ 3 ( SCAN )] key.
"
M-SCAN
" appears on the LCD. Scanning will pro-
ceed from the lowest to the highest programmed
channel number and will stop on a channel when a
transmission is received.
6. The channel number will blink during reception.
7. To stop scanning, press the [ 16/9 ] , [ WX ] , [ CALL ( MENU )] , or PTT key.
Page 26
" menu appears.
" menu with the CHANNEL selector
."
SCAN Type
" in the
Prior-
VM-3500E