Vertex Standard VM-3500E Owner's Manual page 44

Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Group call number.
1. Press the [ CALL ( MENU )] key. The "
menu will appear.
2. Turn the CHANNEL selector knob to select "
(To cancel, select "
knob or press [ 16/9 ] key.)
3. Press the [ ENT ] key. The transceiver will beep, and
the " Group Directory
4. Turn the CHANNEL selector knob to select the
," then press the [ ENT ] key.
Manual
"
5. Enter the MMSI number (eight digits) which you want
to contact by the keypad, then press the [ ENT ] key.
6. Turn the CHANNEL selector knob to select "
then press the [ ENT ] key. Of course, you may select
the operating channel from the channel list, as well.
7. Enter the operating channel which you want to com-
municate on by the keypad, then press the [ ENT ] key.
8. Press the [ ENT ] key again to transmit the Group Call
signal.
9. After the GROUP CALL is transmitted, all the radios
in the group will switch to the designated channel.
10. Listen to the channel to make sure it is not busy, then
key the microphone and call the other vessels you
desire to communicate with.
Page 44
Exit " with the CHANNEL selector
" will appear.
DSC Operation "
Group
."
Manual
,"
VM-3500E