Unit Nameing - Vertex Standard VM-3500E Owner's Manual

10.10 UNIT NAMING
This selection allows you to provide the name to the radio and optional RAM+
Mic when connected.
1. Press and hold down the [ CALL ( MENU )] key until
" Radio Setup
2. Press the [ ENT ] key, then select "
" Radio Setup
knob.
3. Press the [ ENT ] key.
4. Turn the CHANNEL selector knob to select the Unit
("Radio" or "RAM1") to be named, then press the
[ ENT ] key.
5. Press the one of the Keypad keys to enter the first
letter of the unit name.
Example: Press the [ 2 ( MEM )] key repeatedly to toggle
among the seven available characters associated
with that key:
6. Press the [ ENT ] key to enter the desired letter and
move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
do not use all twelve character, press the [ ENT ] key
to move to the next space.
8. Press and hold the [ ENT ] key to enter the name and
exit from the "
menu.
9. If you want to enter the name of another unit, repeat steps 3 through 8.
10. To exit this menu and return to radio operation mode press the [ 16/9 ] key.
Page 54
" menu appears.
" menu with the CHANNEL selector
A B C a
Unit Name " menu. The LCD will return to the "
Unit Name
" in the
b c 2 .
Radio Setup "
VM-3500E