Table of Contents
Advertisement
ACTiSYS Corp.
WINDOWS XP INSTALLATION GUIDE
Note: Make sure no hardware or software is occupying or binding the USB port that you intend to use for
ACT-IR2000u. Plugging and unplugging multiple USB devices on the same USB port may cause damage
to your registry and may make your Windows O.S unstable.
UNPLUG ACT-IR2000U on your computer before you boot your system.
Note:
No prior similar IrDA-USB driver software was installed. If yes, please refer to
Un-installation Guide to remove the old driver, before installing this new driver software
1.
Do not connect ACT-IR2000U to your computer while booting the system.
2.
Double-click
IR2000U20.exe.
3.
Wait...
Release V1.42
ACTiSYS Corporation 2001 All Rights Reserved
Actisys
USB-IR Dongle Installation Manual
26
Advertisement
Table of Contents
