Table of Contents
Advertisement
4.8
Entry Code Time Zone Enable / Disable
The entry code time zone affects only those entry codes programmed under the time zoned entry
code location codes 21-25 for relay 1, 46-50 for relay 2. To use this feature, be sure that four-digit
entry codes have been programmed into the system under the proper location codes, and be sure
that an entry code time zone has been programmed (2.4.4).
1.
Pick up your telephone and press * 7 (beep).
2.
Press * 3 6 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3.
Press 1 * (beep) to turn the entry code time zone on, or press 0 * (beep) to turn the
entry code time zone off.
4.
Hang up.
4.9
Auto Relay Time Zones Enable / Disable
The four automatic relay activation time zones can be turned on or off as required. Time zones one
and two operate relay 1, while time zones three and four operate relay 2. To use this feature, be sure
that the automatic relay activation time zones have been programmed (2.4.3).
1.
Pick up your telephone and press * 7 (beep).
2.
Press * 3 5 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3.
Enter the time zone number _ then press * (beep).
4.
Press 1 * (beep) to turn the auto relay time zone on, or press 0 * (beep) to turn the
auto relay time zone off.
5.
Hang up.
4.10
Auto Answer Enable / Disable
The auto answer feature must be turned on to allow relay activation and programming of the system
from a remote location. When the residents phone number is called, the 1812 will pick up the call
after the programmed number of rings (2.3.6).
1.
Pick up your telephone and press * 7 (beep).
2.
Press * 1 5 and enter the four-digit MASTER CODE _ _ _ _ (beep).
3.
Press 1 * (beep) to turn auto answer on, or press 0 * (beep) to turn auto answer off.
4.
Hang up.
Page 38
1812-065-M-3-07
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
