Entry Code Programming; Four-Digit Entry Code Programming; Delete Four-Digit Entry Codes; Delete All Four-Digit Entry Codes - DoorKing 1812 Classic Owner's Manual

2.6 ENTRY CODE PROGRAMMING

2.6.1 Four-Digit Entry Code Programming

This programming sequence programs four digit entry codes into the system memory. You can store
up to 50 unique entry codes into the system memory, however these codes will perform different
functions dependent on the location code that they have been stored in. Each relay can have 14
momentary activation codes, one flash code, five hold codes, and five time zoned codes. We suggest
that you keep a log of all entry codes programmed into the system (see appendix).
1. Press * 0 2 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Enter the location code _ _ then press * (beep).
3. Enter the four-digit entry code _ _ _ _ then press * (beep).
4. Repeat steps 2 and 3 to enter additional codes.
5. Press 0# TOGETHER to end this programming step (beeeeeep).
Relay 1
Location Code
01 – 14
15
16 – 20
21 - 25
2.6.2 Delete Four-Digit Codes
This programming sequence allows you to delete individual four digit entry codes.
1. Press * 0 2 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Enter the location code _ _ then press * (beep).
3. Enter # # # # then press * (beep).
4. Repeat steps 2 and 3 to delete more entry codes.
5. Press 0# TOGETHER to end this programming step (beeeeeep).

2.6.3 Delete ALL Four-Digit Entry Codes

This programming sequence deletes all four-digit entry codes that have been programmed into the
system. CAUTION: this programming step is irreversible once it is started.
1. Press * 0 0 and enter the four-digit MASTER CODE _ _ _ _ (beep).
2. Press 9 9 9 9 * (beep). This programming sequence will automatically end itself. This
will be indicated by a long tone (beeeeeep).
Page 32
Function
Momentary
Flash
Hold
Time Zoned
Relay 2
Location Code
26 – 39
40
41 – 45
46 - 50
Function
Momentary
Flash
Hold
Time Zoned
1812-065-M-3-07