Preliminary Steps; Operation Quick Start - Vertex Standard VX-530 Series Operating Manual

Hand-held portable land mobile transceiver

Hide thumbs Also See for VX-530 Series:

Table of Contents

VX-530 S

Preliminary Steps

Install a charged battery pack onto the trans-

ceiver, as described previously.

Screw the supplied antenna onto the Antenna

jack. Never attempt to operate this transceiver

without an antenna connected.

If you have a Speaker/Microphone, we rec-

ommend that it not be connected until you

are familiar with the basic operation of the

VX-530.

Turn the top panel's VOL/PWR knob clock-

wise to turn on the radio.

Turn the top panel's CH selector knob to choose the desired operating

channel. A channel name will appear on the

LCD. If you want to select the operating chan-

nel from a different Memory Channel Group,

press the Soft key assigned to the "Memory

Group Up" or "Memory Group Down" func-

tion to select the Memory Channel Group containing the desired oper-

ating channel. A group name will appear on the LCD whenever the

Soft key is pressed.

Note: Some models are programmed so that the operating channels

are selected by the Soft key and the memory channel group is se-

lected by the CH selector knob. For further details, contact your

Vertex Standard dealer.

Page 6

Vertex Standard Co., Ltd.

Table of Contents