Basic Operation; Preliminary Steps; Operation Quick Start - Vertex Standard Spirit VXA-700 Operating Manual

Preliminary Steps

r Install a charged battery pack onto the transceiver, as
described previously.
r Screw the supplied antenna onto the Antenna jack.
Never operate this transceiver without an antenna con-
nected.
r If you have an optional Speaker/Microphone or head-
set. we recommend that it not be connected until you
are familiar with the basic operation of the VXA-700.
12
B O
ASIC PERATION

Operation Quick Start

r To turn the radio on,
press and hold in the
( PWR ) Switch for 3
seconds.
r The opening message
will appear on the dis-
play, then frequency dis-
play will appear.
r Press the
tively, switch the oper-
ating band among the
AIR band, 2-m Amateur
band, and FM BC band
each time you press the
key. .
r Directly entering frequencies from the keypad is the
easiest method if you know the frequency on which
you wish to operate. Just enter the five digits of the
frequency to move to that frequency.
For example, to set 134.35 MHz,
press
To set 118.275 MHz, you do not need to press the
final "5" in the frequency:
VXA-700 S
key repeti-
Ò Ò Ò Ò
Ò Ò Ò Ò
.
O
PIRIT PERATING
.
M
ANUAL