Wacom Intuos GD-0405-R User Manual page 130

Calibrating Intuos for AutoCAD in Windows
If you are using Intuos to digitize a drawing, you will need to calibrate Intuos with the paper drawing's
coordinate system. The calibration allows you to digitize points from the paper drawing into the
appropriate coordinate system of your drawing file.
1. From the D
RAWING
2. Choose the T
ABLET
• Digitize point #1 on the paper drawing. Then enter the xy coordinate from the paper drawing at the
digitized point.
• Digitize point #2 on the paper drawing. Then enter the xy coordinate from the paper drawing at the
digitized point.
• Digitize more points if necessary. More than four points may take more time than expected for
AutoCAD to compute the best-fitting projective transformation.
3. Press E when you are done.
NTER
When Intuos has been configured as a digitizer and calibrated, you can use C
using Intuos as a digitizer and as a Windows system pointer.
E , open the T
DITOR OOLS
and C options, then:
ALIBRATE
Contents
Index
menu (O menu for Release 13).
PTIONS
+T to toggle between
TRL
APPENDICES
Page 130