Wacom Intuos GD-0405-R User Manual page 116

The 4D Mouse or Lens Cursor
buttons work but the screen
cursor will not move.
The Intuos Pen or Airbrush
selects everything, will not stop
drawing.
The eraser selects everything
or will not stop erasing.
The Intuos Pen or Airbrush tip
does not function.
The side switch does not work. Be sure you press the side switch when the pen tip is in proximity—do
Open the Wacom control panel and go to the T
your 4D Mouse or Lens Cursor. Make sure the U
checkbox is deselected.
Open the Wacom control panel and go to the tool's T
Move the T P
IP RESSURE
O button and increase the C
PTIONS
Open the Wacom control panel and go to the E
the E P
RASER RESSURE
O button and increase the C
PTIONS
Make sure the status LED changes from orange to green when the tip
is pressed. If it does not, you may have defective hardware (see
Testing Your Intuos
Check the control panel's T
assigned to a L
EFT
this without pressing down on the pen tip.
From the Wacom control panel, verify that the side switch is set to the
proper function for the application and tool that you are using.
Make sure the tablet status LED changes from orange to green when
you press the side switch. If it does not, you may have defective
hardware (see Testing Your Intuos
Contents
Index
F slider toward F
EEL
LICK
F slider toward F
EEL
LICK
Tablet).
B
OOL UTTONS
-C function.
LICK
Tablet).
B
OOL UTTONS
B
SE UTTONS
F
IP EEL
, or select the M
IRM
F setting.
ORCE
F tab. Move
RASER EEL
, or select the M
IRM
F setting.
ORCE
tab and verify that the tip is
HAVING TROUBLE?
Page 116
tab for
O
NLY
tab.
ORE
ORE