Copy Quality - Muratec F-560 Reports Manual

Muratec
F-560
BUYERS LABORATORY INC.
TEST RESULTS AND OBSERVATIONS
Performance of Copier Functions

Copy quality:

Text:
Line art:
Halftones range:
Halftone fill:
Solids: Very Good
Comments:
Lines and text produced by the Muratec F-560
in copy mode had jagged edges. While the half-
tones showed good separation, they were pixi-
lated and grainy.
Density of solid black copied image (based on
eight readings corresponding to eight different
locations on the original):
Density of original:
Range, 1.65 to 1.70 (on a scale of 0 to 2.5, with
2.5 being as dark as would be possible under
most circumstances).
Copier Productivity
Copying speeds: (8-1/2" x 11" copies):
First-copy time from the document feeder:
11.75 seconds (time was the same regardless of
whether automatic exposure selection was on or
off).
© 2005 Buyers Laboratory Inc. WARNING: This material is copyrighted by Buyers Laboratory Inc. and is the sole property of Buyers Laboratory. Duplication of this proprietary report or excerpts from this report, in any manner,
whether printed or electronic (including, but not limited to, copying, faxing, scanning or use on a fax-back system), is illegal and strictly forbidden without written permission from Buyers Laboratory. Violators will be prosecuted
to the fullest extent of the law. To purchase reprints of any BLI reports or articles, contact BLI at (201) 488-0404. Buyers Laboratory Inc., 20 Railroad Avenue, Hackensack, NJ 07601. Contact us at info@buyerslab.com.
Lab Test Report
Fair
Fair
Good
Good
(CONTINUED)
Density of copy:
Range, 1.33 to 1.37 (on a scale of 0 to 2.5, with
2.5 being as dark as would be possible under
most circumstances).
Density range for products in this class tested to
date:
1.06 to 1.53
Halftone range:
Halftone levels were visible from 15% (the mini-
mum coverage level on the original) to 100%.
Number of copies per minute excluding first copy:
21
Number of copies per minute including first copy:
17
5