Screen Saver - Mitel UC360 User Manual

UC360 Administration and User Guide

Screen Saver

To access the Screen Saver settings:
1. Press Settings, then press Advanced
2. Press Display
You can configure the Screen Saver timeout interval by selecting one of the mutually exclusive
radio button options: 15 seconds, 30 seconds, 1 minute, 2 minutes, 10 minutes and 30 minutes.
The default timeout is 2 minutes.
The screen will timeout if the phone is continuously idle for the time-out period that was
configured. This means that none of the following events occur: touch, key press, incoming
call, on a call, or share presentation. The administrator will be logged off.
When the timeout occurs, the screen will go dim and the blue LEDs on the conference unit will
flash in a clockwise rotating pattern. Each LED is on for two seconds until there is a user activity
or an incoming call is received. The followings actions would be considered as a user activity:
• Touch the screen
• Click or move the USB mouse
• Press any keys on the USB keyboard
72