Pre-Saved Remote Computer - Mitel UC360 User Manual

UC360 Administration and User Guide

Pre-Saved Remote Computer

To make remote desktop access easier to use, you can save your computer's IP address/host
name to a USB flash drive.
1. Insert a flash drive into the UC360.
2. Tap
3. Press the RDP icon on the Launch App Shared Mode screen.
4. Enter your computer's IP address in the top text box of the RDP screen and press Save
and Connect.
Your computer's hostname/IP address is saved in a file called uc360RPDID on your flash drive.
You can now plug your flash drive into any UC360 and it recognizes the file. You will see your
IP address appear in the third section of the screen above, Pre-Saved Remote Computer.
Press Connect to access your computer.
If you open the RDP screen before inserting the your flash drive, press the Refresh button to
check for any newly-inserted flash drive.
To overwrite the host, enter the new hostname in the top section and press Save & Connect.
A dialog box will ask you to confirm overwriting of the old hostname.
44
on the UC360 screen