Upgrade System Software; Sd Card Upgrade; Http Server Upgrade - Mitel UC360 User Manual

Upgrade System Software

To upgrade system software:
1. Press Settings
2. Press Advanced
3. Press System Settings
4. Select Upgrade system S/W
You have several options for upgrading the system software as new software loads from Mitel
become available: SD Card or HTTP.

SD Card Upgrade

The SD card must contain the file named upgrade.xml and the upgrade file package, typically
named update.zip, in the top-level folder. Mitel will supply these files with each new software
load. The upgrade.xml file name will contain the new software load version.
1. Insert the SD card with the software upgrade
2. Select Upgrade system S/W now
3. Select SD Card
You will see a series of messages. This can take several minutes; the UC360 will power
off and then on. The UC360 will reboot and load the new software.
4. Unmount the SD card (see "Unmount SD Card" on page 68)

HTTP Server Upgrade

1. Select HTTP Server Address and enter the IP address of the HTTP server where new
sofware loads are stored.
2. Select Upgrade system S/W now
3. Select HTTP
You will see a series of messages. This can take several minutes; the UC360 will power
off and then on. The UC360 will reboot and load the new software.
UC360 Configuration
69