Sealife Sea Dragon flash Instruction Manual page 9

Connecting Flash Link optical cable to SeaLife cameras
For SeaLife cameras:
Attach the other end of the optical cable to the camera adapter
included with your SeaLife camera.
1.
1. Push the optical cable into one of the grooves so it's locked
firmly into position. The end of the cable must be directed at
the camera's flash but should not stick out beyond the
adapter. The adapter has two grooves, so you can add another
cable when using two flashes.
2. Attach the Flash Link adapter around the lens and push down
until it locks firmly into place. There are two small locking
mechanisms located on the outer edge of the adapter that
should lock in to the camera housing. Make sure the adapter
is oriented so it is aligned with the recessed flash window.
3. Once the cable and adapter is firmly attached, run the cables
along the bottom of the flash base and up the flash arm. The
cables should be secured to the flash arm using the Velcro ties
provided with your flash accessory.
2. 3.
9